Freecall for service
www.bfe.net.au
Console
12
Batteries Installation
Please install 2 pieces of AA 1.5V batteries in the
battery case on the back of monitor.
(Whenever Batteries are removed, all the functions
values will be reset to zero.)
Auto On/Off
While the user starts to do exercise, the Display will
show out the workout value automatically. Once stop
exercising over 256 sec, room temperature will be
shown. But the workout value of odometer will be
hold. While user starts exercise again, workout
value of odometer will accumulate continuously.
** Press Mode key for 2 seconds, all the function
values except Odometer will be reset to zero.
Auto Scan
After the monitor is powered on or pressed Mode key,
the LCD will display all functions values from Time-
Calories-Odometer- Pulse- Speed- Distance. Each value will be held for 6 seconds.
Display Modes
Speed:
Display the current training speed from 0.0 to 99.9 KPH or MPH. User also can press
Mode key to display the Speed value.
Distance:
Display the trip distance from 0.0 to 999.9 Km or Mile. User also can press Mode key
to display the distance value.
Time:
Display the workout time from 00:00 to 99:59. User also can press Mode key to display
the workout time value.
Calories:
Display the calories consumption during training from 0.0 to 999.9. User also can
press mode key to display the calories consumption value.
Odometer:
Display the total accumulated distance from 0.0 to 999.0. User also can press
mode key to display the Odometer value.
Pulse:
Display the current heart rate in beats per minute.
To Reset
Press Mode key for 2 seconds, all the function value except Odometer will be reset to zero.
Note:
1. If the computer displays abnormally, please re-install the battery and try again.
2. Battery Spec: 1.5V UM-3 or AA (2PCS).
3. The batteries must be removed from the console before it is scrapped and that they are
disposed safely.
