![background image](http://html.mh-extra.com/html/acf-greenhouses/cross-country-arctic-series/cross-country-arctic-series_manual_457847029.webp)
C R O S S C O U N T R Y T R I P L E W A L L S E R I E S • G R E E N H O U S E I N S T R U C T I O N S
– 28 –
12. SIDEWALLS
Take side panels and peel back the protective poly. Mark the outside top
corner with a marker – apply foil tape, ventilated for the bottom / solid for
the top
(you can do all the panels before hand or 1 at a time)
. After the tape is
applied, take an aluminum “ ” and put it on the top first
(see pic A)
. Next
put one on the bottom
(put in setting blocks – do not cover drain holes – see pic
C)
and push the panel up behind the gutter edge
(see pic B)
. Push the panel
against the foam, make sure the Greenhouse is square and screw on the cap
using #8 x 1/2” screws. If the weather is calm you can position all the
panels first and then fasten all the caps.
POL
YCARBONA
TE SHEET
POL
YCARBONA
TE SHEET
Base
Setting
Block
A
C
B
Summary of Contents for Cross Country Arctic Series
Page 1: ...ACF Greenhouses ...