CLOCK, UNIT, WHEEL, ODOMETER, TEMPERATURE & FUEL METER SETTING
1. Setup operations include 12/24hour clock, bar tachometer scale, shift warning RPM, numbers of engine rotation per signal, wheel
circumference, units, odometer adjustment, units of temperature, temperature warning and fuel meter input resistance selection.
These must be set up step by step. The computer will automatic reversion
to main screen if no button operation for 75 seconds at any setting screen.
2. Press both MODE & RESET buttons to go into setting screen. In setting screens, press RESET button to add the flashing digit by 1
or convert units, press MODE button to confirm the digit setting and jump to next digit or next setting screen to be set. Press MODE
button for 2 seconds at any setting screen to finish the setting and go to main screen.
3. It displays "12 or 24H and XX:XX-XX" symbols and AM/PM in case you select 12H. Operates buttons as descriptions of item 2 to
finish clock and jump to 8,000/16,000rpm scale setting.
4. It displays 8,000rpm scale, presess RESET button to convert 8,000 or 16,000rpm. Press MODE button to confirm the setting and
jump to shift RPM warning setting.
5
. It displays " RPM rXXX00 ". Follow the item 2 of button operation to finish the shift RPM warning setting and jump to engine
specification setting.
6
. It displays "SPC-X.X RPM", the default value is 1.0; there are 4 options: 1.0, 2.0, 3.0 and 0.5. It means the numbers of engine
rotation per signal. For example the value 2.0 means the engine rotate 2 turns to output a signal.
7. Press RESET button to move in loop sequence from one to another value of the 4 values. Press MODE button to confirm the setting
and go to wheel circumference setting screen.
8. In "cXXXX" display, "c" means "Circumference", following 4 default digits; flashing digit is digit to be set. Follow the item 2 of
button operation to finish the wheel circumference setting and jump to unit setting.
9. It displays KM/h or MPH, each press of RESET button converts unit; press MODE button to confirm unit setting and jump to
odometer setting.
10. It displays "ODO & 00000Xkm", the "X" is tested odometer in factory, follow item 2 to setting a desired odometer and jump to
thermometer unit setting. The setting screen will disappear when the odometer is over 30km or your setting is over 30km and
returned to main screen.
11. It displaysm " , or oFF", each press of RESET button converts , or oFF; press MODE button to confirm temperature
setting and jump to temperature warning setting.
12. It displays " XXX" and the selected unit. Follow the item 2 of button operation to finish the temperature warning setting and go to
fuel sensor input resistance setting.
13. It displays "100r and fuel tank symbol", follow the item 2 to select 100, 250, 510 Ohm or oFF and return to the main screen. The
fuel meter bar will disappear if you select oFF mode.
℃
℉
℃ ℉
mode
reset
+
2 sec
mode
mode
mode
mode
mode
mode
reset
mode
reset
mode
mode
mode
reset
mode
mode
mode
reset
mode
reset
reset
reset
reset
reset
reset
mode
mode
mode
reset
mode
reset
mode
reset
mode
mode
2 sec
