Receiver – Back
(1)(8) Antenna connection
(2)(7)(4) Channels A&B ¼” unbalanced audio
output
(3)(6) Channels A&B balanced audio output
(5) 12V AC Power connection
Microphone
1. Microphone cartridge
2. Display window
3. Power switch
4. Battery housing cover
5. IR Signal receiver
• Simply twist and remove battery housing
cover to access IR signal receiver or batteries
6. Battery compartment
• Uses two AA batteries with approximately
8 hours of continuous operation. Replace or
recharge batteries immediately when battery
indicators says battery power are low.
2
Receiver – Front
1. Power button – power ON/OFF
2. Display panel
3. Channel selector – push button to manually
select channels
4. IR Sync sensor
5. SQ – Connection distance controls
6. Microphone Volume controls
7. IR Sync buttons – Push Sync button to IR Sync
your receiver and microphone