Acesonic UHF-1208XR User Manual Download Page 4

Thank

 

you

 

for

 

purchasing

 

Acesonic

'

s

 

UHF

-

1208XR

Acesonic

 

takes

 

pride

 

in

 

providing

 

our

 

custmers

 

with

 

only

 

the

 

most

 

advanced

 

and

 

highest

 

quality

 

karaoke

 

products

 

on

 

the market. Please read trough this USER’S 

MANUAL before operation to ensure proper usage, and keep for future 

Table of Contents

Warnings and Caution....................................................................................2
Safety  Instructions........................................................................................3
Table of Contents...........................................................................................4        
Included Accessories.................................................................................... 4
Receiver/Display panel Descriptions............................................................. 5
Microphone  Descriptions/Operation/Channel  Switching...............................6   
Installation  &  IR  SYNCing(channel  switching)/Battery  Recharging...............7
Troubleshooting............................................................................................8                                                                
Features & Specifications..............................................................................9
Manufacturer  Information............................................................................10                                                                                                                                                                                           

4

Acesonic UHF-1208XR

Before installing your wireless microphone, Here are a few things you should do/know:

Parts checklist

l

Handheld microphone(2)

l

Mounting brackets(1 Set)

l

AC power adapter(2) 

l

UHF-1208X receiver (1)

l

Rechargeable Battery(4)

*Be sure to keep original packaging in case of re-shipping is needed.

l
l

Antenna(2)

l

User manual / warranty card(1)

l

Microphone Battery Recharging Dock(1)

3 ft.  male to male  " cable (1)

¼

1)Check to see whatever the local voltage  accord with operating receiver voltage(Wrong 
selection may lead to burn out of receiver) 
2)Do not dismantle the machine on your own. For internal repair, please contact the local 
distributor or accepted service center. Please see page 10 for more detail.
3)When the machine will not be used for a long time, please disconnect the power plug 
from receiver.
4)Do not recharge your batteries until the batteries are low.

Matters Need Attention

Cleaning

l

Please make sure the power is disconnected before cleaning or repairing the machine.

l

The machine can be cleaned by using a soft  cloth with water. Dry the machine with a dry 
cloth and let it air dry for 15 minutes.

l

Please do not use volatile gasoline, diluents or other chemicals  to cleaned the machine 

Summary of Contents for UHF-1208XR











Reviews: