Acer XR343CK, User Manual

Page: 27 / 29

XR343CK User Guide English 17
Picture
Move Enter
Mode - Standard
Audio
Gaming
Color
OSD
System
Off
Power-off
USB charge
Off Quick Start Mode
Off USB 3.0
C-Type USB Port Select
• Input
: Select the source from HDMI1 (2.0), DHMI2 (2.0), DP1, DP2 or TYPE C.
• Auto Source : Select On to enable auto search for signal source in order or Off
to disable this function.
• DisplayPort (DP) Format : Select the DisplayPort format from DP1.1 , DP1.2 or
DP1.4 .
Note:
• The default displayport format DP1.4 can support high-bandwidth video.
• DP1.1 and DP1.2 support most video formats.
• If the Mode is set to
HDR
, the default DP Format will be
DP1.4
and other
DP formats will be grayed out.
• Wide Mode : Select your preferred screen aspect from Full , Aspect or 1:1 .
• PIP/PBP > PIP/PBP Mode : Select PIP/PBP Mode from Off (function is
disabled) or from any of the following:
-
PIP Large/PIP Small : Displays the sub source in a large window or small
window respectively. After you select this option, select the PIP Position from
Top Left , Top Right , Bottom Right or Bottom Left and Sub Source from
HDMI1 (2.0) , HDMI2 (2.0) , DP1 , DP2 or TYPE C . Then select Source Swap
to swap the main source and sub source. Finally select Audio Source from
Main (source) or Sub (source).
-
PBP
: Displays the main source and sub source next to each other. Select
the PBP Size from
Aspect
and
Full
, select Sub Source from
HDMI1 (2.0)
,
HDMI2 (2.0)
,
DP1
,
DP2
or
TYPE C
. Then select Source Swap to swap the
main source and sub source. Finally select Audio Source from
Main
(source)
or
Sub
(source).
• Hot Key Assignment : Select the function of Hot Key 1 and Hot Key 2 from
Modes , Volume , Gamma , Contrast , Blue Light , Over Drive , VRB or PIP/PBP .
• Display Data Channel (DDC)/Command Interface (CI) : Configure monitor
settings remotely from PC that is connected to the monitor. Select On to enable
this function or Off to disable.
• HDMI Black Level : Select the HDMI Black Level from Normal or Low .
• Quick Start Mode
: Select
On
to speed up boot speed or
Off
to disable the
function.
• USB Port Select : Set the USB port type to C-Type or B-Type .
• USB 3.0 : Select On to enable USB 3.0 or Off to disable the function.