32
Chapter 3
3.
Lay down the heat sink fan assembly, in an upright position, on top of the optical drive, as shown below,
then disconnect the fan cable from the mainboard.
4.
Remove the heat sink fan assembly from the chassis then lay it down in an upright position—with the
thermal patch facing upward. Do not let the thermal patch on the heat sink fan assembly touch the work
surface.
5.
Use an alcohol pad to wipe off the thermal grease from both the heat sink and the processor.
Summary of Contents for Veriton X4610
