
5 System utilities
76
Reinstalling programs
If you uninstall one of the preinstalled programs and want to reinstall
it, do the following:
1
Make sure that the system is turned on.
2
Insert the System CD into the CD or DVD drive.
3
Select the application that you want to reinstall.
4
Follow all onscreen instructions until you finish the installation.
Recovering your system
When your operating system files is lost or damaged, the recovery
process will require you to restore your system's original factory
default settings. Follow the steps below:
1
Insert the System CD into the CD or DVD drive.
2
Reboot the system.
3
Follow all onscreen instructions.
4
Remove the System CD and insert the Recovery CD into the CD or
DVD drive.
5
After the operating system has been copied to your hard disk,
remove the Recovery CD and insert the System CD into the CD or
DVD drive.
6
Follow all onscreen instructions until you finish the installation.
Caution!
Using the Recovery CD will erase all files previously
saved in your computer so make sure to back up your important
files before starting the recovery process.
Make sure that the Systems CD/Recovery CD is properly inserted
into the CD or DVD drive. Improper insertion may damage both
the CD and the drive.
VT7500series_EN.book Page 76 Tuesday, April 16, 2002 11:42 AM
Summary of Contents for Veriton 7500
