5
To clean your pointing device
To clean a regular mouse (with rubber ball)
1
Open the circular cover underneath the mouse.
2
Take out the rubber ball and wipe it with a soft, damp cloth.
3
Put the ball back and close the cover.
To clean an optical mouse
For users of an optical mouse, refer to the documentation that came
with your mouse for maintenance instructions.
To clean your monitor
Make sure that you keep your screen clean. For cleaning instructions,
refer to the documentation that came with your monitor.
When to contact a service technician
•
If you dropped and damaged the computer
•
If liquid has been spilled into the computer
•
If the computer is not operating normally
•
If a computer problem persists even after you have checked and
done the troubleshooting tips discussed in the “Frequently-asked
questions” section on page 77
•
If your problem is not listed in the “Frequently-asked questions”
section on page 77
•
If you want to replace or upgrade any of your computer’s internal
components
Asking for technical assistance
For technical assistance, contact your local dealer or distributor. You
may also access the Web site (www.acersupport.com) for information
on how and where to contact the service centers available in your area.
VT7500series_EN.book Page 5 Tuesday, April 16, 2002 11:42 AM
Summary of Contents for Veriton 7500
