Acer Veriton 5600GT, User Manual

Page: 38 / 106

3 Setting up your computer 32
Connecting a monitor
To connect a monitor, simply plug the monitor cable into the monitor
port
(blue port) located on the rear panel of your computer.
Note: Refer to the monitor manual for additonal instructions and
information.
Connecting the power cable
Caution! Before you proceed, check the voltage range in your
area. Make sure that it matches your computer’s voltage setting. If
they don’t match, change your computer’s voltage setting
according to your area’s voltage range.
Set the voltage selector switch to the voltage range applicable to your
area (a). Plug the power cable into the power cable socket located on
the rear panel of your computer (b). Then plug the other end of the
power cable into a power outlet.