Chapter 3
107
Removing the Main Board
1.
See “Removing the Housing” on page 98. (Remove the left panel only)
2.
Put the housing to lying position with the open area facing upward.
3.
See “Removing the AGP VGA Card” on page 99
4.
See “Removing the Modem Card” on page 99
5.
Before you remove the system main board, make sure that all cables connected to the main board are
removed.
6.
Remove the eight screws holding the main board and then remove the main board from the housing.
Removing the I/O Port Bracket
1.
See “Removing the Housing” on page 98. (Remove the left panel only)
2.
Put the housing to lying position with the open area facing upward.
3.
See “Removing the AGP VGA Card” on page 99
4.
See “Removing the Modem Card” on page 99
5.
See “Removing the Main Board” on page 107
6.
Slide the bracket and then lift it up in the direction as shown
.
Summary of Contents for Veriton 3500
