35
Chapter 2
Silent Boot
When enabled, BIOS is in graphical mode and
displays only an identification logo during POST
and while booting. Then, the screen displays the
operating system prompt (as in DOS) or logo (as
in Windows). If any error occurs while booting,
the system automatically switches to the text
mode.
You may also switch to the text mode while
booting by pressing
F9
after you hear a beep that
indicates the activation of the keyboard.
Enabled
or Disabled
Num Lock After Boot
Allows you to activate or deactivate the Num
Lock function upon booting.
Enabled
or Disabled
Memory Test
Lets you specify whether you want BIOS to
perform or bypass the memory test. This
parameter is only available when Fast Boot is
disabled.
Disabled
or Enabled
Configuration Table
This parameter allows you to enable or disable
the display of the configuration table after POST
but before booting. The configuration table gives
a summary of the hardware devices and settings
that BIOS detected during POST.
Enabled
or Disabled
Update BIOS w/ Boot Block When enabled, it automatically flashed the BIOS
file from the hard disk drive in case the system
fails to boot up.
Disabled
or Enabled
Network Boot ROM
Allows you to enable or disable the control of the
local area network (LAN) BIOS. Setting this
parameter to Disabled speeds up the booting of
the computer.
Disabled
or Enabled
Language Type
Select the language.
English
or Japanese
Parameter
Description
Options
Summary of Contents for Veriton 3200
