5.
Press
. A prompt asks you to retype the password to verify
your first entry.
6.
Retype the password then press
.
After setting the password, the system automatically sets the
Setup Password parameter to
Present
.
7.
Press
to exit the System Security screen and return to the
main menu.
8.
Press
to exit the BIOS utility. A dialog box appears asking if
you want to save the CMOS data.
9.
Select
Yes
to save the changes and reboot the system.
10. While rebooting, turn off the system then open the housing.
11. Set SW1 switch 3 to
Off
to enable the password function.
The next time you want to enter the BIOS utility, you must key-in your
Setup password.
Changing or Removing the Setup Password
Should you want to change your setup password, do the following:
1.
Enter the BIOS utility and select System Security.
2.
Highlight the Setup Password parameter.
3.
Press
or
to display the password prompt and key-in a new
password.
or
Press
or
and select
None
to remove the existing
password.
2-
24
User’s Guide
Summary of Contents for V62X
Page 1: ...V62X System User s Guide ...
Page 30: ...Figure 1 6 Installing a SIMM System Board 1 17 ...
Page 74: ......
