2.5
Power Saving Configuration
The Power Saving Configuration parameters are configurable only if
your system supports the power-management feature.
The following screen shows the Power Saving Configuration
parameters and their default settings:
Power Saving Configuration
Page 1/1
Power Management Mode ................[Enabled ]
IDE Hard Disk Standby Timer .......[ 15] Minute(s)
System Standby Timer ..............[ 15] Minute(s)
System Suspend Timer ..............[ 15] Minute(s)
Monitored Activities
*IRQ 0........[Disabled]
IRQ 8 .......[Disabled]
*IRQ 1........[Enabled ]
IRQ 9........[Disabled]
IRQ 3........[Disabled]
IRQ 10.......[Disabled]
IRQ 4........[Disabled]
IRQ 11.......[Disabled]
IRQ 5........[Disabled]
IRQ 12.......[Enabled ]
*IRQ 6........[Enabled ]
*IRQ 13.......[Enabled ]
IRQ 7........[Disabled]
*IRQ 14.......[Enabled ]
IRQ 15.......[Disabled]
¯
= Move Highlight Bar,
®
¬
= Change Setting
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
2.5.1
Power Management Mode
This parameter allows you to reduce power consumption. When this
parameter is set to
Enabled
, you can configure the IDE hard disk and
system timers.
Setting to
Disabled
deactivates the
power-management feature and all the timers.
2-
16
User’s Guide
Summary of Contents for V62X
Page 1: ...V62X System User s Guide ...
Page 30: ...Figure 1 6 Installing a SIMM System Board 1 17 ...
Page 74: ......
