Machine Maintenance
3-67
Replacing the Thermal Module
0
IMPORTANT
:
+
Make sure all thermal pads for the mainboard chipsets and VRAMs are in
place before replacing the thermal module.
1.
Use a lint-free cloth or cotton swab soaked in isopropyl alcohol or acetone to remove all
traces of thermal grease from the contact surfaces on both the thermal module and the
CPU.
2.
Apply a small amount of thermal grease onto the center area of the CPU.
There is no need to spread the grease manually, the force used during the installation of
the thermal module is sufficient. The following brands of thermal grease are approved for
use:
N302 I-Connosseur
Honeywell
Eapus XR-PE
3.
Place the thermal module on the mainboard. Make sure to align the captive screws with
the screw holes on the mainboard. Keep the module as level as possible to spread the
thermal grease evenly.
Figure 3-100.
Thermal Module
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ
НОУТБУКОВ
.
Запчасти
и
комплектующие
для
ноутбука
.
Схемы
,
сервис
мануалы
,
инструкции
по
разборке
ноутбука
.
ВОССТАНОВЛЕНИЕ
ДАННЫХ
.
г
.
Санкт
-
Петербург
,
Тел
.(812)951-37-99,
Тел
.8-921-951-37-99,ICQ:573812745, [email protected]