Disassembly Procedures
1-17
LCD Module Removal
0
Prerequisite:
NOTE:
NOTE
:
The LCD cable includes the G-sensor cable, light sensor cable, and TOF sensor cable.
For Convertible model, the eDP cable includes the LCD panel cable, touch control
board cable, and camera cable.
For Clamshell model, the eDP cable includes the LCD panel cable and camera cable.
1. Disconnect one end of the LTE FPC from the LTE board connector (A). Then
disconnect the other end of the LTE FPC from the mainboard connector (B)
(
).
2. Disconnect the WLAN antennas cables from the WLAN module connectors (C)
(
).
Figure 1-18. LCD Module Removal
A
B
A
C
