Acer TravelMate 7000 User Manual Download Page 80

Page: 80 / 156

Options

4-5

4.4

External Pointing Device

This notebook accepts either a serial mouse or PS/2-compatible mouse or
similar pointing device.

Connecting an External Pointing Device

Plug a serial mouse into the serial port (

) on the rear panel; plug a

PS/2-compatible mouse into the PS/2 port (

) on the rear panel.

To enable a serial mouse, you need to use the Add New
Hardware tool in the Windows 95 Control Panel to detect and
install the necessary drivers.

If you connect an external PS/2 mouse to the notebook, press

-| to enter suspend-to-memory mode. Then press any key

to return to enable the external mouse. Installing an external
PS/2 mouse disables the built-in touchpad.

(a) Serial Mouse

(b) PS/2 Mouse

Figure 4-4

Connecting an External Pointing Device

Summary of Contents for TravelMate 7000





























































































































































Search results

Summary of Contents for TravelMate 7000

Reviews:

Related manuals for TravelMate 7000

Brands by name

Popular brands

Acer TravelMate 7000, User Manual

Search results

Summary of Contents for TravelMate 7000

Reviews:

Related manuals for TravelMate 7000

Brands by name

Popular brands