Acer TravelMate 630 series, Service Manual

Page: 45 / 134

Chapter 2 35
Startup Configuration
The Startup Configuration screen contains parameter values that define how your computer behaves on
system startup.
The following table describes the parameters in this screen. Settings in
boldface
are the default and
suggested parameter settings.
Parameter Description Options
CPU Speed Set CPU high speed or low speed.
High
or Low
Legacy Diskette A Help: Selects floppy type. Note that 1.25MB 3 1/2”
references a 1024 byte/sector Japanese media
format. The 1.25MB, 3 1/2” diskette requires a 3-Mode
floppy-disk drive.
Options: 1.44/1.25MB 3 1/2”
or Disabled
Primary Master Show Primary Master HD size.
User can enter submenu to set some detail functions
Auto
or None or User or CD-
ROM or ATAPI Removable or
IDE Removable
Secondary Master Show Secondary Master Device Status.
User can enter submenu to set some detail functions. Auto or None or User or CD-
ROM or ATAPI Removable or
IDE Removable
I/O Device Configuration Enter submenu to set onboard device configuration
Help: Pheripheral Configuration.
PCI IRQ Routing Set Default IRQ of PCI device.
Help: Menu used to setting IRQ for PCI Devices.
USB Host Controller Set Enabled or Disabled the USB hardware
Help:
Disabled resources will be freed up for other
uses.
Enabled
or Disabled
PhoenixBIOS Setup Utility
Information Main Advanced Security Boot Exit
Item Specific Help CPU Speed [High]
Legacy Diskette A: [1.44/1.25MB 3 ½”]
>Primary Master [TOSHIBA MK2018GAP-(PM)]
>Secondary Master [MATSHITADVD-ROM SR-81]
>I/O Device Configuration
>PCI IRQ Routing
USB Host Controller: [Enabled]
USB BIOS Legacy Support: [Enabled]
Temporary solution
F1 Help
"#$
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
%& %& %& %&
Select Menu Enter Select > Sub Menu F10 Save and Exit