Acer TravelMate 220 series Service Manual Download Page 76

Page: 76 / 127

Chapter 3

Detach the touch pad frame together with the touch pad button from the upper case carefully.

Remove the touch pad scroll key from the upper case.

To detach the touch pad board, first disconnect the touch pad cable from the touch pad board and then
remove the touch pad board from the upper case.

Removing the Touch Pad Cable

See “Removing the Battery Pack” on page 49

See “Removing the Hinge Caps” on page 56

See “Removing the Middle Cover” on page 56

See “Removing the Keyboard” on page 57

See “Removing the Touch Pad Frame” on page 67

Remove the touch pad cable from the upper case carefully.

Summary of Contents for TravelMate 220 series
































































































































Search results

Summary of Contents for TravelMate 220 series

Reviews:

Related manuals for TravelMate 220 series

Brands by name

Popular brands

Acer TravelMate 220 series, Service Manual

Search results

Summary of Contents for TravelMate 220 series

Reviews:

Related manuals for TravelMate 220 series

Brands by name

Popular brands