![background image](http://html1.mh-extra.com/html/acer/rl70/rl70_service-manual_4020900031.webp)
Chapter 3
23
This chapter contains step-by-step procedures on how to disassemble and assemble the desktop computer for
maintenance and troubleshooting.
Disassembly Requirements
To disassemble the computer, you need the following tools:
•
Wrist grounding strap and conductive mat for preventing electrostatic discharge
•
Flat-blade screwdriver
•
Philips screwdriver
•
Hex screwdriver
•
Plastic flat-blade screwdriver
•
Plastic tweezers
NOTE:
The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatch when putting back the components.
Chapter 3
System Disassembly and Assemble
Summary of Contents for RL70
