Unplug 2 lamp cables
Use a Hex-head screwdriver unscrewed 4 screws
to release the DVI and D-SUB connectors
(No1~4Hex Nut screws
Size=M3x8;Torque=4.5~6.5KGFxCM).
Disconnect the FFC cable to the connector of
panel.
Use finger to push the lock according to arrow
direction then take out the FFC cable
Hold one side of down side that had been
separated from front bezel
Use properly force to pull up front bezel
Take out lamp cables right through the No.1-2
square holes and separate the bracket chassis
module and LCD panel apart.
Unhook the key function board from front bezel,
disconnect the key function cable
S19
S18
S17
S15
S14
S16
1
2
3
4
1
2
17
Go to cover page
4. Assembly and Disassembly Procedures (continued)
ACER X193HQ
