Upgrading your Computer -
17
Installing a memory module
1.
Select an empty DIMM slot.
2.
Remove the new memory module from its packaging,
handling it by the edges.
3.
Align then insert the memory module into the DIMM
slot (1).
4.
Insert the memory to the slot until the retaining clips
snap inward (2).
The module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that
the notch in the module lines up with the tab in the
memory slot.
5.
Repeat steps 1~4 to install the other memory modules.
6.
Observe the Post-installation instructions on page 6.
1
2
2
1
Note
DIMM slots on the mainboard must be installed only in certain
configurations. Numbers next to DIMM slots correspond to
installation sequence.
Be sure to install the memory module in DIMM1 slot followed by
DIMM2 slot.
