Acer PREDATOR G7710 SERIES User Manual Download Page 76

Page: 76 / 102

6 Upgrading your computer

English

of the case. This back plate will go where the tabs used to be.

Press the release latch to secure the card in place.

Locate the second PCI Express power cord from the CrossFire-Ready power
supply and plug it in to the second graphic card.

10 Attach the CrossFire connector to connect the two graphic cards.

The system comes with an CrossFire connector designed to work with that
mainboard.

Note: When you power up the PC, you'll want to ensure that the video

connector (to your monitor) is plugged into the graphic card.

11 Observe the post-installation instructions described on page 49.

When you turn on the system, you will be greeted with a "pop up" bubble
in the lower right hand corner, telling you that you have an CrossFire-
enabled PC.

Note: Illustrations are for reference only. Actual product specifications may

vary.

Summary of Contents for PREDATOR G7710 SERIES







































































































Search results

Summary of Contents for PREDATOR G7710 SERIES

Reviews:

Related manuals for PREDATOR G7710 SERIES

Brands by name

Popular brands

Acer PREDATOR G7710 SERIES, User Manual

Search results

Summary of Contents for PREDATOR G7710 SERIES

Reviews:

Related manuals for PREDATOR G7710 SERIES

Brands by name

Popular brands