Acer PREDATOR G7710 SERIES User Manual Download Page 69

Page: 69 / 102

Eng

lis

Removing and installing an optical

drive

The system supports a variety of storage devices for additional storage capacity
and scalability.

To remove an optical drive:

Perform the preinstallation instructions described on page 48.

Remove the front bazel.

Disconnect the power and data cables from rear of the old drive.

Move the release slider of the selected drive to the unlock position.

Pull the drive out of the device bay.

Observe the post-installation instructions described on page 49.

To install a new optical drive:

Perform steps 1 through 5 of the previous section.

Remove the new optical drive from its protective packaging.

Slide the new optical drive into the empty drive bay.

Move the release slider into the lock position.

Connect the power and data cables to the rear of the new drive.

Observe the post-installation instructions described on page 49.

Summary of Contents for PREDATOR G7710 SERIES







































































































Search results

Summary of Contents for PREDATOR G7710 SERIES

Reviews:

Related manuals for PREDATOR G7710 SERIES

Brands by name

Popular brands

Acer PREDATOR G7710 SERIES, User Manual

Search results

Summary of Contents for PREDATOR G7710 SERIES

Reviews:

Related manuals for PREDATOR G7710 SERIES

Brands by name

Popular brands