CG437K User Guide English
19
Gaming
Mode - Standard
OSD
System
Picture
Color
Audio
On
AdaptiveSync
Off
Refresh Rate Num
Enter
Move
Gaming
Off
VRB
Off
Aim point
On
Ultra-Low Latency
X
Over Drive
Normal
1. Over Driver:
Select Off, Normal, or Extreme.
2. AdaptiveSync
: To control support AdaptiveSync or not, default is On.
----------------------------------------------------------------------------------------------------------
Note:
•
If AdaptiveSync is “ON”, then the Over Drive selection is set to “Normal”
automatically.
•
If AdaptiveSync is “OFF”, then the user can set Over Drive to either one of the
three settings including: (a) Extreme (b) Normal (c) Off.
• G-Sync Compatible only support DP (AdaptiveSync).
3. Refresh Rate Num:
Display the panel’s current refresh rate on the screen.
4. VRB
: To choose whether to support dynamic picture more clean control, default is
Off.
----------------------------------------------------------------------------------------------------------
Note:
• HDR setting = (Auto or HDR-1000) is not support VRB.
• VRB function does not affect the (Logo, Aim Point, Message and Input Icon)
brightness.
• VRB set "Normal or Extreme", when to turn on AdaptiveSync, will auto set VRB is
"Off".
• VRB set "Normal or Extreme", when to adjustment (Brightness, Blue Light, ACM),
will auto set VRB is "Off".
• VRB setting "Normal or Extreme", when detection of Input Timing <75Hz, will auto
off the VRB and gray out to disable.
• VRB = (Normal or Extreme), because the IC control dynamic picture is cleaner, so
the overall Brightness will be dark, "Extreme" will be darker than “Normal”.
5. Ultra-Low Latency
: Set to On to speed up the processing time of the display
switching process.
----------------------------------------------------------------------------------------------------------
Note:
•
AdaptiveSync is “On”, Ultra-Low Latency is automatically setting to "On" and gray
out.
•
AdaptiveSync is “Off”, Ultra-Low Latency can control “On” or “Off”.
