English
46
USING THE PROJECTOR
Making a direct connection from your computer to the projector*
1.
Turn “Off” the DHCP option on the projector.
2.
Configure the IP address, Subnet Mask, Gateway, and DNS on projector (“Network > LAN”).
3.
Open
Network and Sharing Center
page on your PC, and assign the identical network parameters to
your PC as set on projector. Click “OK” to save the parameters.
4.
Open the web browser on your PC and type in to the URL field the IP address, assigned in step 3.
Then press “Enter” key.
Reset
Reset all values for LAN parameters.
Network control menu
Crestron
Use this function to select the network function (port: 41794).
For more information, please visit http://www.crestron.com and www.crestron.com/getroomview.
Extron
Use this function to select the network function (port: 2023).
PJ Link
Use this function to select the network function (port: 4352).
AMX Device Discovery
Use this function to select the network function (port: 9131).
Telnet
Use this function to select the network function (port: 23).
HTTP
Use this function to select the network function (port: 80).