29
Chapter 3
Mechanical Reassembly Procedure
No
Procedure
Photo
1 Assemble the Bottom Cover:
(1) Screw 1 screw to
assemble the Elevator Foot.
(2) Screw 1 screw to
assemble the Ballast-to-lamp
connector Module
2 Assemble DC DC / Blower:
(1) Screw 1 screw to
assemble the DC DC Module.
(1) Screw 3 screws to
assemble the Blower.
Notice: Please ensure the
blue wire arrangement (The
direction should be heading
forward as the picture shows)
while assembling the DC DC
Module.
1. Assemble Bottom Cover Module / DC DC / Blower
(2) Ballast-to-lamp
connector moduel
(2) Blower
(1) DC DC Module
The direction should be
heading forward
(1) Elevator Foot
