Chapter 3
28
No
Procedure
Photo
1 Remove Blower / DC DC:
(1) Unscrew 3 screws to
remove the Blower.
Notice: Please ensure the
blue wire arrangement (The
direction should be heading
forward as the picture shows)
while assembling the DC DC
Module.
(2) Unscrew 1 screw to
remove the DC DC Module.
2 Remove the Bottom Cover:
(1) Unscrew 1 screw to
remove the Ballast-to-lamp
connector Module
(2) Unscrew 1 screw to
remove the Elevator Foot.
9. Remove Blower / DC DC / Bottom Cover Module
(1) Blower
(2) DC DC Module
The direction should be
heading forward
(1) Ballast-to-lamp
connector moduel
(2) Elevator Foot
