background image

 

   47"             62"           77.2"         92.4"       107.5"       122.7"      137.9"        153"         183.4"      213.7"       244.1"       274.4"      304.8"       

Screen
Size

Di stanc e

   1.5               2                2.5             3              3.5               4              4.5              5                6                7                8               9               10

 

Figure 4 Positioning of 7763PS 

B. 

Adjustable Feet

 

 Picture tilt and projection angle can be adjusted by twisting 

Adjustable Feet. Projection angle can be adjusted 2

°

 to 8.5

°

 degrees 

by rotating Adjustable Feet. 

Figure 5 Adjustable feet 

Moving the Projector 

Use the carrying handle when moving the projector. 

Replace the lens cover and rotate the feet fully clockwise (to 
shorten the feet) when moving the projector to prevent damage to the 
projector. 

Caution 

The carry bag (supplied) is intended to protect the projector from dust and 
scratches on the surface of the cabinet. It is not designed to protect the 
projector from external shock. 

Do not transport the projector in an unsuitable transport case by using a courier 
or transport service. This may cause damage to the projector.

 

 

  

 

 

 

English 4 

Summary of Contents for PalmPro 7763PS

































Reviews: