Resetting Lamp Timer
If replacing the lamp after 1500 hours of operation, please carry
out the following operation within 10 minutes of powering on.
OSD FUNCTION
Press the MENU button into OSD menu,
and use “
4
” (K) or “
3
”
(KEYSTONE-) to select the Control
page. Then press the Menu button again
to highlight the Lamp item.
Press “
4
” (K) or “
3
”
(KEYSTONE-) buttons, the lamp usage
time will display on the bottom of the
screen and can be adjusted.
•
Use the “
4
” (K) or “
3
”
(KEYSTONE-) buttons to select the
"Reset" item and press the “MENU”
to reset the usage time.
•
After reset the usage time, press
“EXIT” (AUTO) to save and exit.
OSD
Main OSD Menu
Press the “Menu” key and the main OSD
menu structure will appear as shown at
right (Fig. 23). Whenever AV box is
attached, 4 subpages appear in the
menu: Display page, Image page, Control
page, and Source page. However if input
is from PC and no AV box is attached,
Source will disappear in the menu.
Press the “Menu” key again to enter
Display page items, or press “
3
” or
“
4
” to select sub-pages. (The main OSD
menu will automatically disappear if a
key is not pressed within 10 seconds).
Press the “Exit” button to leave the current sub-page, and press the
button again to leave the main OSD menu
(at the same time the settings are
saved).
Figure 18 Main OSD menu
Input
status
PC input without AV
box
PC input with AV box
Video input with AV box
English 16
