manualshive.com logo in svg

Acer Packard Bell EasyNote NX82 Series, Service Manual, Page: 165 / 184

Share
Download
Acer Packard Bell EasyNote NX82 Series Service Manual Download Page 165

Chapter 6

119

FRU (Field Replaceable Unit) List

This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of Packard Bell EasyNote NX82. 
Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).

Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information available on your 
regional web or channel. For whatever reasons a part number change is made, it will not be noted on the printed Service 
Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your Acer office may have a DIFFERENT part number code from 
those given in the FRU list of this printed Service Guide. You MUST use the local FRU list provided by your regional Acer 
office to order FRU parts for repair and service of customer machines.

NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or regulations on how to 

dispose it properly, or follow the rules set by your regional Acer office on how to return it.

Chapter 6

Summary of Contents for Packard Bell EasyNote NX82 Series

























































































































































































Reviews:

No comments