6
English
Note: "*" Only for P7270i/P7280i series.
"#" Japan area is not supported.
14
MENU
•
Press "MENU" to launch the Onscreen display (OSD) menu,
back to the previous step for the OSD menu operation or
exit the OSD menu.
•
Confirm your selection of items.
15
Four directional
select keys
Use up, down, left, right buttons to select items or make
adjustments to your selection.
KEYSTONE
Adjusts the image to compensate for distortion caused by
tilting the projector.
16
LOCATION
Choose the menu location on the display screen.
17
PAGE
For computer mode only. Use this button to select the next or
previous page. This function is only available when connected
to a computer via a USB cable.
18
Empowering
key
Unique Acer functions: eOpening, eView, eTimer, ePower
Management
19
COLOR
Press "COLOR" to adjust the color temperature of image.
20
CONTRAST
Use the "CONTRAST" option to control the difference
between the lightest and darkest parts of the picture.
21
VIDEO
To change source to COMPOSITE VIDEO.
22
S-VIDEO
To change source to S-Video.
23
PIP
Press "PIP" to see two screens at the same time. The main
screen projection signal uses VGA input by default while the
smaller PIP display uses a secondary video source.
24
(*)
WIRELESS
Press "WIRELESS" to display the image which is wirelessly
transmitted from the PC to the projector via the "Acer
eProjection Management" utility. (for wireless model)
25
BRIGHTNESS
Press "BRIGHTNESS" to adjust the brightness of the image.
26
RGB
Press "RGB" for true-color optimization.
27
COMPONENT
Press "COMPONENT" to change source to Component video.
This connection supports YPbPr (480p/576p/720p/1080i) and
YCbCr (480i/576i).
28
VGA
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p
/
1080i), YCbCr (480i/576i) and RGBsync.
29
DVI
Press "DVI" to change source to DVI. This connection supports
digital RGB, analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr
(480i/576i) and HDCP signals.
30
HDMI™
To change source to HDMI™.
31
KeyPad 0~9
Press "0~9" to input a password in the "Security settings".
# Icon
Function
Description
