background image

P3150/P3250/P3150 Refresh/P3250 Refresh

Confidential

4-9

3.  HDTV/ Component

Procedure  

 

 - Test equipment: DVD player

 

 

 - Test signal:  Ycbcr/YPbPr 

Inspection item

   

 

- HDTV  performance test

Inspection

 

 

Distance   - 1.8M ~2.5M

Criteria 

 

 -  Check any abnormal color, line distortion or any 

noise on the screen.

 

 

- Check the sound from speakers. 

4. Audio Test

Procedure  

 

 - Test equipment: DVD player 

 

 

 - Test signal: CVBS 

Inspection item   

 - Audio performance test

Inspection Distance   - 1.8M ~2.5M
Criteria 

 

 - Check the sound from speakers.

 

 

 - Check “Volume” is normal 

 

 

 - Check “Mute” is normal

 

5.HDMI Test

  

 

Procedure                - Test Signal : 720p,1080i

                                    - Test Pattern : Any Pattern 
                                    - Equipment: DVD Player with HDMI output
                                    - Display type must be set to 16:9
Inspection item           - HDMI Test
Criteria                        - Ensure if the image is well performed and the
                                     color can not discolor.

Summary of Contents for P3250 Refresh













































































































































Reviews: