XV273K User Guide English
21
•
Hotkey Assigment:
Select the function of shortcut key 1 or shortcut keys2:(Modes,
Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive,VRB).
------------------------------------------------------------------------------------------------------
Note:
Hot Key 1 and Hot Key 2 can’t repeat the same function.
•
DDC/CI:
Allows the monitor settings to be set through the software on the PC.
------------------------------------------------------------------------------------------------------
Note:
DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
•
HDMI Black level:
Select to set HDMI black level.
•
Quick start mode:
Select Off or On. Turn on to speed up boot speed.
•
LED Control:
Controls the brightness of the Key LED.
•
4K-144Hz Mode:
Default is “Off” (Support DP Only).
Off: Support 4K-120Hz (Support HDR and FreeSync).
On: Support 4K-144Hz (Not Support HDR and FreeSync).
------------------------------------------------------------------------------------------------------
Note:
Want to support 4K-144Hz, Graphic Card must be able to support 4K-144Hz
and both DP1 and DP2 must be connected at the same time to enable this feature.
To support display 4K-144Hz.
1. Min requirement is AMD RX470 or above graphic card
2. To connect both DP1 + DP2 port, need to use in box DP cables or VESA certified
DP cables.
3. Must to turn on the 4K-144Hz mode in system page of OSD.
