background image

English

Copyright © 2018. Acer Incorporated. 

All Rights Reserved.

Acer LCD Monitor User Guide

Original Issue: 09/2018

Changes may be made periodically to the information in this publication without obligation 

to notify any person of such revisions or changes. Such changes will be incorporated in new 

editions of this manual or supplementary documents and publications. This company makes 

no representations or warranties, either expressed or implied, with respect to the contents 

hereof and specifically disclaims the implied warranties of merchantability or fitness for a 

particular purpose.

Record the model number, serial number, purchase date and place of purchase information 

in the space provided below. The serial number and model number are recorded on the 

label affixed to your computer. All correspondence concerning your unit should include the 

serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, 

in any form or by any means, electronically, mechanically, by photocopy, recording or 

otherwise, without the prior written permission of Acer Incorporated.

Acer LCD Monitor User Guide

Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ 

product names or trademarks are used herein for identification purposes only and belong to 

their respective companies.

Summary of Contents for Nitro VG271UPbmiipx
































Reviews: