Acer Nitro VG240Y Series User Manual Download

Page: 23 / 28

English

3. Toggle to the left or right to adjust the sliding scales.
4. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard

value for Windows).

Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or

User.

6.  Modes:To choose scenario mode.
7.  Grayscale Mode:To choose Grayscale mode.
8.  sRGB: Default is off. You can turn sRGB on or off to better color match with peripheral

devices, such as printers and digital cameras.

9. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
10. 6-axis

Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.

Audio

Mode - Stardard

Picture

Volume

Enter

Move

Oﬀ

Mute

Color

OSD

System

Save Settings to...

Audio

Gaming

Press the MENU key to open the OSD.

2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the

right to

navigate to the element you wish to adjust and press the joystick to enter it.

3. Toggle to the left or right to adjust the sliding scales.
4.

Volume: Adjust the volume

Mute:

To choose

mute on/off

Gaming

Mode - User

Picture

Color

Over Drive

Normal

Free Sync

Oﬀ

MPRT

Enter

Move

Oﬀ

Aim Point

OSD

System

Save Settings to...

Audio

Gaming

Press the MENU key to open the OSD.

Summary of Contents for Nitro VG240Y Series





























Search results

Summary of Contents for Nitro VG240Y Series

Reviews:

Related manuals for Nitro VG240Y Series

Brands by name

Popular brands

Acer Nitro VG240Y Series, User Manual

Search results

Summary of Contents for Nitro VG240Y Series

Reviews:

Related manuals for Nitro VG240Y Series

Brands by name

Popular brands