English
7
Installation
1. Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the HDMI (optional) and /or DVI-D (optional) /or DP (optional) input
socket of the monitor, and the HDMI (optional) and /or DVI-D (optional) /or DP (optional) output
socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable
connector.
3.
(Optional): Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on
the computer with the audio cable.
4. Insert the monitor power cable into the power port at the back of the monitor.
5.
Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
FreeSync :
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efficient, virtually stutter free and low-latency display update.
