ACER KB242HYL
8
S3
Disassemble the lamp wire
Tear down MYLAR off SHD(Shielding) as picture 1.
Tear off the tape on the lamp wire and etract the lamp wire form the P/BD(Power Board)
as picture 2.
PICTURE 1 PICTURE 2
S4
Disassemble the TRlM
from MF.
Unlock 2 TRIM screws and disassemble TRIM from MF as picture 1.
Disassemble CTRL BD from TRIM as picture 2.
PICTURE 1 PICTURE 2
S5
Disassemble MF and lamp
wire from panel.
Unlock 9 screws from MF and disassemble MF from panel as picture 1.
Tear off adhesive tape from panel as picture 2.
Extract lamp wire from panel as picture 3.
PICTURE 1 PICTURE 2 PICTURE 3
S6
Disassemble I/F BD and
P/BD from SHD.
Disassembled the Mylar and adhesive tape from SHD.
Unlock
2 hex screws and all PCBA screws as picture 2.
Disassemble the I/F BD from the SHD and extract the P/BD wire, FFC LVDS.
Disassemble the P/BD from the SHD.
PICTURE 1 PICTURE 2 PICTURE 3
NOTE:
Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows.
Please detach the Circuit boards and follow local regulations for disposal.
P/BD
