27
English
Problems with the Projector
9
Image is too small
or too large
•
Adjust the zoom ring on the top of the projector.
•
Move the projector closer to or further from the
screen.
•
Press "MENU" on the remote control or on the
control panel. Go to "Image --> Aspect Ratio" and
try different settings.
10
Image has slanted
sides
•
If possible, reposition the projector so that it is
centered on the screen.
•
Press the "Keystone" on the OSD until the sides are
vertical.
11
Image is reversed
•
Select "Image --> Projection Mode" on the OSD and
adjust the projection direction.
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
Insert a paper clip (Illustration #1) into the
"Reset" hole on the bottom of the projector
to restart the system.
Reset
1
Paperclip
