K10
25
Circular Geometry, Cross hatch
and Dots
1. The four lines of outer frame
should not only be existent but
also distinguishable.
2. The dots in the square should be
distinguishable.
Scaled Text
1. Rotate Zoom ring to wide mode
(Maximum projected image)
2. Fix projector to set diagonal length
of projected image to 60”.
3. Adjust focus ring to make
resolution of 4 corners and center
are balanced.
4. Check the characters should be
recognized easily.
5. Rotate Zoom ring to tele mode
(Minimum projected image)
6. Adjust focus ring to make
resolution of 4 corners and center
are balanced.
7. Check the characters should be
recognized easily.
INFOCOMM SMPTE 133
1. The intervals of center thin white
and black bars should be distinct.
2. The squares around the small
circle in the center show the
transition of full white to full black.
Summary of Contents for K10
