22
En
gl
ish
Setting
Note: Functions vary depending on model definition.
Source Selection
Manual by source menu, Auto by Smart Detection.
Auto Screen
Default is "On" , the down/up move of electronic screen will be
related with power on/off of Projector.
DC 5V Out
Default is "On". Choose "Off" to Disable DC 5V OUT connection.
<Note>
5V/1.5A power output if MHL source is not detected.
Warning!The DC 5V Out may happen power conflict if connecting
to PC and result in electric shock and/or injury.
VGA OUT (Standby) Default is "Off". Choose "On" to enable VGA OUT connection.
Test Pattern
Default is "Off" to disable this function. Choose "On" to enable
test pattern for installation.
LAN
LAN Standby
Default is "Off". Choose "On" to enable LAN control under
standby mode.
LAN IP
Identify IP address.
LAN Mask
Identify Mask address.
LAN Reset
Reset LAN function.
Information
Display the projector information for Model Name, Input Source,
Signal Type, Display Mode, Software Version and QR code on the
screen.
Scan QR code linking to Acer projector portal via mobile.
Reset
Press the "ENTER" button and choose "Yes" to return the
parameters on all menus to the factory default settings.
