4
1. Open the control panel and double click on the "Display" icon.
2. From the "display properties" window, select the "Settings" tab.Click the
"Advanced properties" button in the bottom right corner.
3. Select the "monitor" tab. Click the "change" button in the top right corner.
4. Now the"Add new hardware wizard" opens. Confirm by pressing the
"Continue" button. Select "Search for a driver better than the one
currenly used" and press "Continue".
5. Insert the DISK supplied with your monitor and press on the "Search"
field in the bottom right corner. Now select your floppy disk drive.
6. Press on "OK" again and then on "Continue" in the "Add new hardware
wizard". The driver will now be installed. Close all windows to complete
the installation.
7. Now a window "Insert Disk" emerges and one file "FP553.cat" cannot
be found. Click "Skip File" to continue. This action will not harm your
system or monitor. Close the "Display Properties" window and now the
driver is installed to your computer.
Windows
2000
The first time you start Windows with a new monitor, the system will detect it
and automatically starts the “Add new hardware wizard“. Carry out the
instructions beginning at step 4.
1. Click “Start“ then “Settings“.
2. Open the control panel and double click on the “Display“ icon. From the
“display properties“ window, select the “Settings“ tab. Click the
“Advanced properties“button in the bottom right corner.
3. Select the “monitor“ then click “Properties“
4. Select “Driver“ tab then click “Update Dirver“. The “Upgrade Device
Driver Wizard“ will pop up .Then Click “Next“.
5. Select “Display a list of the known drivers for this device so that I can
choose a specitic driver“ then click “Next“.
6. In the next window, click “Have Disk“, then “Install From Disk“ window
will pop up, click “Browse“,the “Located File“ will pop up . In this
window ,click on the arrow ( ) of “Look in“ box , then select your floppy
disk driver.
7. Click “Open“ twice, then click “OK“. Select the model of your monitor
from the list in the next window then click “Next” twice.
8. The “Digital Signature Not fonnd“ window will appear , click “Yes“, then
click “Finish“.
9. Now the new driver
is
installed to your computer.
