Acer Fossil HD B1-760, Service Manual

Page: 38 / 102

33
4.10. SN Input Config
Single: indicates that you want write one IMEI only into your handset;
Double: indicates that you want to write two IMEI into your handset;
Four: indicates that you want to write four IMEI into your handset;
IMEI2-AutoCreate: IMEI2 will automatically counted according to IMEI1 if checked;
D-value: the delta value between IMEI1 and IMEI2;
FileAssign: decide if IMEI will be assigned automatically from the IMEI excel file configured at “IMEI File”;
lowerRange1 and upperRange1
：
indicate the lower range and upper range of IMEI1 respectively, if the low range
value less than or equal to the upper range value, the tool will check IMEI1
。
lowerRange2 and upperRange2
，
lowerRange3 and upperRange3
，
lowerRange4 and upperRange4
：
the function of
lowerRange1 and upperRange1 similar respectively;
NumAssign: decide if IMEI will be assigned automatically by Number in tool interface;
BeginNum1,EndNum1 and CurrNum1:indicate the begin number, end number and current number of IMEI1
respectively;
BeginNum2,EndNum2 and CurrNum2, BeginNum3,EndNum3 and CurrNum3, BeginNum4,EndNum4 and CurrNum4:
function of BeginNum1,EndNum1 and CurrNum1 similar respectively;