Acer Extensa 700 User Manual Download

Page: 38 / 136

Storage

User’s Guide

Storage

This computer supplies you with all-in-one media storage:

❑

High-capacity Enhanced-IDE hard disk

❑

Standard ultra-slim internal 3.5-inch floppy drive

❑

High-speed CD-ROM drive (swaps with other high-
capacity media modules)

Hard Disk

The removable hard disk module can be upgraded when
you need more storage space. See “Hard Disk Upgrade” on
page 61.

Floppy Drive

The ultra-slim internal floppy drive reads and writes on
standard 3.5-inch diskettes.

Ejecting a Floppy Disk

Press the floppy disk eject button to eject a floppy disk from
the floppy drive.

Media Bay

A high-speed CD-ROM drive module sits in the media bay
on the right side of the computer. The CD-ROM drive gives
you portable multimedia access.

700-e.book : 700-1e.fm Page 18 Wednesday, April 22, 1998 11:18 AM

Summary of Contents for Extensa 700









































































































































Search results

Summary of Contents for Extensa 700

Reviews:

Related manuals for Extensa 700

Brands by name

Popular brands

Acer Extensa 700, User Manual

Search results

Summary of Contents for Extensa 700

Reviews:

Related manuals for Extensa 700

Brands by name

Popular brands