90
Chapter 3
17. Remove the one screw (B) securing the USB board to the lower case.
18. Lift the USB board and disconnect the cable from USBCN1 on the USB board.
Removing the Main Board
1.
See “Removing the Battery Pack” on page 56.
2.
See “Removing the SD dummy card” on page 57.
3.
See “Removing the PC and ExpressCard dummy cards” on page 58.
4.
See “Removing the Lower Cover” on page 59.
5.
See “Removing the DIMM” on page 60.
6.
See “Removing the WLAN Board Modules” on page 61.
7.
See “Removing the Hard Disk Drive Module” on page 63.
8.
See “Removing the Optical Drive Module” on page 64.
9.
See “Removing the Middle Cover” on page 68.
10. See “Removing the Keyboard” on page 71.
11. See “Removing the Heatsink Fan Module” on page 72.
12. See “Removing the CPU and VGA Heatsink Module” on page 73.
13. See “Removing the CPU” on page 74.
Step
Size (Quantity)
Color
Torque
1
M2 x L4 (1)
Silver
1.6 kgf-cm
Summary of Contents for Extensa 5630 Series
