Acer eMachines EZ1600 Service Manual Download Page 17

Page: 17 / 154

Chapter 1

Using the Keyboard

The keyboard has several different types of keys and buttons.

Feature

Icon

Description

Function keys

Press these keys to start program actions. Each program uses
different function keys for different purposes. See the program
documentation to find out more about the function key actions.

Audio playback keys

Press these keys to play your audio files and to adjust the
volume.

Windows key

Press this key to open the Windows Start menu.

This key can also be used in combination with other keys to
open utilities. See “Windows Keys” on page 10.

Fn key

Press this key in combination with keys that have alternate
functions defined, such as the

F12

keys.

Press <

> + <

> to increase the brightness of the display.

Press <

> + <

> to decrease the brightness of the display.

Application key

Press this key to access shortcut menus and help assistants in
Windows.

Navigation keys

Press these keys to move the cursor and to copy, cut, and
paste objects.

Summary of Contents for eMachines EZ1600



























































































































































Search results

Summary of Contents for eMachines EZ1600

Reviews:

Related manuals for eMachines EZ1600

Brands by name

Popular brands

Acer eMachines EZ1600, Service Manual

Search results

Summary of Contents for eMachines EZ1600

Reviews:

Related manuals for eMachines EZ1600

Brands by name

Popular brands