3
English
Attaching the monitor on the wall
Remark:
•
Please use only the NO. 2 Screws (35 mm x 4 pcs) provided with this type of installation.
•
Please check monitor weight in advance to choose suitable load capacity of VESA arm
stand.
•
Do not discard the original screws as these may be needed for future use.
1. Remove the original screws x 4 Fig.
from the opening back of the monitor.
2. Tighten the 4 pcs NO.2 screws as Fig
.
3. Connect the monitor onto the wall.
Original Screws x 4
Use the 35 mm
NO.2 Screws x 4
Mount
(Not included)
