38
En
gl
ish
To Change the Lamp
1
Turn off the projector by pressing the power button.
2
Allow the projector at least 30 mins to cool down.
3
Disconnect the power cord.
4
Open the screw cover on the right side of the projector. (Illustration #1)
5
Use a screwdriver to loosen the screw on the right side of the projector.
(Illustration #2)
6
Push and slide the top cover (Illustration #3) and then open the top cover.
(Illustration #4)
7
Loosen two screws on the lamp module (Illustration #5) and pull up the
lamp bar. (Illustration #6)
8
Pull out the lamp module by force. (Illustration #7)
To replace the lamp module, reverse the previous step.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Summary of Contents for E131D series
Page 1: ...Acer Projector H5370BD E131D HE 711J Series User s Guide ...
Page 62: ......
