Acer Dynamic 33130, Operations Manual & Parts List

Page: 17 / 74

17
4-5 Tailstock
1. The main structure of the tailstock: the tailstock body, tailstock base plate, the
tailstock sleeve, and speed control box. The tailstock sleeve and spindle are in
the same level center position, also support the longitudinal movement on the
bed and the spindle support the work material, cutting and drilling of two ends.
2.Operation
2-1. The tailstock hand wheel is located next to the speed control box, please
operate transmission shift handle, and then turning the hand wheel tailstock
spindle to do 1 to 1 or 1 to 4 fast-slow moving for drilling feed and
backward.
2-2. Shaft-clamp spindle fixed the tailstock center.
2-3. Clamping plate for fix the tailstock tightly on lathe bed.
2-4.When the center of tailstock center sleeve and spindle are not on the same
level line, please loosen and tight the screw by both adjust screw A
。
This
adjustment is also available on tailstock center and spindle center horizontal
adjustment for cutting of between center.