English
34
USING THE PROJECTOR
1.8 / 2.0 / 2.4 / 2.6
: For specific PC / Photo source.
otee:
These options are only available if the 3D mode function is disabled, the
Wall Color
setting is not set
to
Blackboard
, and the
Display Mode
setting is not set to
DICOM SIM.
,
HDR SIM.
or
HLG SIM.
In 3D mode, user can only select
3D
for
Gamma
setting.
If the
Wall Color
setting is set to
Blackboard
, user can only select
Blackboard
for
Gamma
setting.
If the
Display Mode
setting is set to
DICOM SIM.
, user can only select
DICOM SIM.
for
Gamma
setting.
If the
Display Mode
setting is set to
HDR SIM.
or
HLG SIM.
, user can only select
HDR SIM.
or
HLG
SIM.
for
Gamma
setting.
Color Settings
Configure the color settings.
BrilliantColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
Color Temperature
: Select a color temperature from Warm, Standard, Cool, or Cold.
Color Matching
: Select the following options:
±
Color: Adjust the red, green, black, cyan, yellow, magenta, and white level of the image.
±
Hue / R(red)*: Adjust the color balance of red and green.
otee:
*If the
Color
setting is set to
White
, you can adjust the red color setting.
±
Saturation / G(green)*: Adjust a video image from black and white to fully saturated color.
otee:
*If the
Color
setting is set to
White
, you can adjust the green color setting.
±
Gain / B(blue)*: Adjust the image brightness.
otee:
*If the
Color
setting is set to
White
, you can adjust the blue color setting.
±
Reset: Return the factory default settings for color matching.
±
Exit: Exit the “Color Matching” menu.
RGB Gain/Bias:
This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
±
Reset: Return the factory default settings for RGB gain/bias.
±
Exit: Exit the “RGB Gain/Bias” menu.
Color Space (non-HDMI input only)
: Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
Color Space (HDMI input only)
: select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
Signal
Adjust the signal options.
Automatic
: Configure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
Frequency
: Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to flicker vertically.
Phase
: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or flickers, use this function to correct it.
H. Position
: Adjust the horizontal positioning of the image.
V. Position
: Adjust the vertical positioning of the image.
otee:
This menu is only available if the input source is RGB/Component.